HAMMERING MACHINE

RECOMMENDED USE

The machine is suggested to designe solid or empty wire with diamantato or martellato effect. The wire produced with this method can be then used for the production of chains manufactured by hands or by machine.

CHARACTERISTICS

This machine has inside two small spare parts in  iron with widia or diamond pin rotating one against the other and impressing a particular effect on the wire. It is possibile to change the effect on the wire by changing the shape of the pin or progression speed of the wire. In the version PLC controlled it is possibile to obtain other effect like torcion or shining alternate to design. It is possibile to use round, half round and square wire starting from 0.5 mm to 4 mm.

METHOD OF USE

380 v – 50 Hz electrical feed.

MAINTENANCE

No particular maintenance needed; take care of what is written in the operator’s manual.

TECHNICAL DATAS

Dimensions: 750 mm x 520 mm x 1330 mmWeight
Weight: 100 KG
Electrical feed: 380 v – 50 Hz
Electric power: 0.4 Kw
Engine power: 0.18 Kw
Speed: variable
Noise: 78 db (a)
Coiling speed: variable