ADJUSTABLE BENDER
RECOMMENDED USE
This is a semi-automatic machine which can bend tube or wire links of various sections with twistings that go from 0°to 270° and is also able to work with non-welded links.
CHARACTERISTICS
The machine is able to bend any section of tube, only the holding pliers vary, depending on the section. The maximum bending capacity is a 3mm diameter.
WHERE TO USE IT
An attachment point of compressed air is sufficient.
MAINTENANCE
None, except cleaning the work surface.
TECHNICAL DATAS
Dimensions of equipment 500 mm X 300 mm X 200 mm
Weight when empty approximately 20 Kg
Work system involved: Semi-Automatic
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_LAMINATOIO-MANUALE-PER-FILO.jpg
1080
899
arezzoweb
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
arezzoweb2024-06-02 23:29:352024-06-03 07:26:19MANUAL ROLLING MILL FOR WIRE
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_ATTREZZO-A-CONTENERE-X-BATTERE-CATENE-500mm.jpg
1080
899
arezzoweb
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
arezzoweb2023-12-14 23:29:352023-12-15 15:15:15SPECIAL EQUIPMENT FOR HAMMERING CHAINS (500mm)
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_ATTREZZO-X-BATTERE-CATENE-60-100mm.jpg
1080
899
arezzoweb
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
arezzoweb2023-12-14 23:29:352023-12-15 15:19:10EQUIPMENT FOR HAMMERING CHAINS (60-100mm)
https://www.zone-creative.com/wp-content/uploads/2023/12/ZONE_ATTREZZO-A-CONTENERE-X-BATTERE-CATENE.jpg
1080
899
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2023-12-14 16:32:572023-12-19 14:18:32SPECIAL EQUIPMENT FOR HAMMERING CHAINS (100mm)
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_INCANNATRICE-MANUALE.jpg
1080
902
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2023-12-14 12:23:142023-12-15 15:39:00MANUAL TOOL FOR HOLLOW WIRE
https://www.zone-creative.com/wp-content/uploads/2018/09/spine_varie_schiave.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2022-07-22 16:34:462023-09-15 13:56:59VARIOUS SPINDLES SHAFT
https://www.zone-creative.com/wp-content/uploads/2018/09/stampi_disegnare_lastre_tubi.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2022-07-22 10:57:042023-09-15 13:45:41ROUHD DIES WITH TEXTURE
https://www.zone-creative.com/wp-content/uploads/2018/09/stampo_disegnato_maglie.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2022-07-22 10:55:222023-09-16 08:12:29STAMP FOR LINKS WITH DESIGN
https://www.zone-creative.com/wp-content/uploads/2018/09/testa_di_turco.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2022-07-22 10:09:582023-09-16 08:15:23TURKISH HEAD/ROLLS FOR TURKISH HEAD
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_DISPOSITIVO-MANUALE-PER-MOLLE-1.jpg
1080
899
Alessandro Donati
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Alessandro Donati2022-07-21 13:04:222024-07-19 06:56:46TOOLING FOR SPRINGS
https://www.zone-creative.com/wp-content/uploads/2022/07/ZONE_DISPOSITIVO-PIEGATORE-VARIABILE.jpg
1080
899
Alessandro Donati
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Alessandro Donati2022-07-21 13:04:222024-07-19 13:23:24ADJUSTABLE BENDER
https://www.zone-creative.com/wp-content/uploads/2018/09/ZONE-schede-attrezzature-PIEGATORE-PER-BRACCIALI-E-ORECCHINI.jpg
519
495
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2018-10-31 12:21:092023-09-15 13:49:37BENDER FOR BANGLES AND EARRINGS
https://www.zone-creative.com/wp-content/uploads/2018/09/stampe_trance_varie_elementi.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2018-10-31 10:58:472023-09-16 08:10:03MODULS FOR VARIOUS ELEMENTS
https://www.zone-creative.com/wp-content/uploads/2018/09/trafile_metallo_duro.jpg
1024
1024
Stefano Pezzola
https://www.zone-creative.com/wp-content/uploads/2023/09/ZONE-CREATIVE-restiling-300x40.png
Stefano Pezzola2018-10-30 17:23:562023-09-16 08:18:07CARBIDE DIES
